Before you begin
Ensure:
The Lumin Screen is powered on.
A CR2450 battery has been installed.
The pendant has been assembled correctly.
You have access to the Lumin Screen.
Pair the pendant
Press and hold the grey button on the rear of the Lumin Screen for approximately 3 seconds.
Select Settings.
Select App Settings.
Open Smart Home Controller.
Select the orange pairing icon and wait for the green ring.
Press and hold the pendant button for 3 seconds.
Wait until the pendant appears.
Enter:
Device Name
Device Type (EMERGENCY_DEVICE)
SIA Zone Number
Select Save.
Press the pendant once to verify an emergency alert appears.
Need assistance? You can contact Lumin Support here:
email: support@mylumin.org
phone (AU): +61 3 8899 7525
phone (NZ): +64 800 700 151
Standard call rates apply.
