Skip to main content

Replacing the Battery in a Zigbee Pendant (ZB308)

Replace the battery whenever the pendant no longer responds or has reached the end of its service life.

Written by Karl Kenneth Sadorra

Battery Required

  • GP CR2450 Lithium Coin Cell

Replace the battery

  1. Remove the white cover.

  2. Loosen the three screws.

  3. Lift the blue cover.

  4. Remove the green insert.

  5. Replace the battery with the brand side facing down.

  6. Reinstall the green insert.

  7. Reassemble the pendant.

  8. Press the panic button for three seconds to power it on.

Test

Press the pendant and verify an alert appears on the Lumin Screen.


Need assistance? You can contact Lumin Support here:

email: support@mylumin.org
phone (AU): +61 3 8899 7525
phone (NZ): +64 800 700 151

Standard call rates apply.

Did this answer your question?